LT PVC & XLPE Control Cables

Advantage

LT Control cable XLPE Insulated - higher current rating and emergency overload rating; Superior short circuit rating; Low dielectric loss much better insulation resistance; Resistant to chemical & corrosive gases etc.; Better resistance to surge currents much longer life of the cables.

Applicable Standards

LT Power cable XLPE Insulated: IS 7098/Part 1/1988

Construction

1. Conductor
   • IEC 60228 specifies four different classes of conductors; class-2. control cables normally have conductors of class 1 (solid conductors) or class 2 (stranded conductors).
   • Conductor forms: circular solid, circular stranded, sector shaped solid, sector shaped stranded
2. Insulation – The insulation materials for control cables are PVC / XLPE colors red, Yellow, Blue & Black.
3. Inner Sheath – PVC Type ST2 as per IS 5831 Option FR Type.
4. Armouring – Single layer of Galvanizing steel round wire/flat strip. If required
5. Outer Sheathing – PVC Type ST-2 asper IS 5831

TECHNICAL DETAILS OF LUMINO 1.1 KV, 1.5SQMM COPPER CONDUCTOR, XLPE INSULATED, ARMOURED / UNARMOURED CONTROL CABLE

Cable Code - 2XY, 2XFY 2XWY

Physical Parameter

Electrical Parameter

Remarks: Information given above is only for ref purpose. Lumino Can manufacture different size of cable other than mentioned above with higher/lower standard length as per customer requirements.

TECHNICAL DETAILS OF LUMINO 1.1 KV , 2.5SQMM COPPER CONDUCTOR, XLPE INSULATED , ARMOURED /UNARMOURED CONTROL CABLE

Physical Parameter

Electrical Parameter