High Temperature Thermal Resistant Alloy Conductor
These are high ampacity conductors with inner core composed of Galvanized steel or Aluminium clad Steel & outer layer composed of high Strength – thermal resistant aluminium alloy with round or trapezoidal shaped.
Aluminium-Zirconium wires (Type-AT2), concentrically stranded over a steel core
| SR. NO. | DESCRIPTION | RANGE |
|---|---|---|
|
1 |
Conductor Area |
58 mm2 to 1520 mm2 |
|
2 |
Conductor construction |
6Hi-TAL/ 1 Steel to 84Hi-TAL/ 1 9 Steel |
|
3 |
Conductivity of Al Alloy (Hi-TAL) |
55.0 % IACS |
At a temperature of 20°C (68°F), the density of hard-drawn aluminium has been taken as 2.703 g/cm3 (168.74 lb/cf) and for steel wire 7.8 g/cm3 (485.69 lb/cf).
| SR. NO. | DESCRIPTION | RANGE | |
|---|---|---|---|
|
1 |
Permissible Temp in continuous opreation |
210°C |
302°F |
|
2 |
Temp in a short circuit (duration up to 5s) |
250°C |
482°F |
Note: The Catalogue Conductor Parameter are informative and can be customized as per Project Requirements
Values based on following Specifications:
High Strength – Thermal resistant aluminium alloy wires (Type-AT2) for overhead line conductor as per IEC 62641 | Concentric lay overhead electrical stranded conductors IEC 61089, IEC 62219 or ASTM B779 | Aluminium Clad Steel Wires, IEC 61232, ASTM B415, EN 50540 & More
Quality is not an act, it's a habit. At Lumino, quality has always been a journey and not a destination. At Lumino, quality control checks exist at every stage-right from procuring raw materials to the end product.
